The Transformational Process Model

The Transformational Process Model The Transformational Process Model A contrast of the transformational process model as it applies to the manufacturing (car manufacturing) and service (advertising) industries. Slack et al provide a model which assists in understanding the transformational process. Their model looks at the transformation of inputs into outputs of goods and services and the range of activities and operations that an organisation undertakes as part of this process. Slack et al’s transformational process model is robust enough to apply to both manufacturing and service industries and it is perhaps in contrasting these two areas that one is best able to understand the usefulness of their model. In simple terms, Slack et al’s the transformational process model deals with the process involved in transforming an input resource into an output good or service (Slack et al, 2001, p.9). A generic transformational process model can be set out as follows (Slack et al, 2001, p.10): The above generic input-transformation-output model applies to the operations of most organisations. However, as with any generic model, it fails to sufficiently differentiate between subtleties. As such, when considering differences between different types of operations (ie manufacturing and services) and then considering further differences within those different types (ie different types of manufacturing operations), it is necessary to expand on the generic input-transformation-output model set out above. In terms of the generic transformational process model set out above, it is important to note that inputs to the process will either be â€Å"transformed† or â€Å"transforming† resources. Slack et al define â€Å"transformed† resources as being â€Å"the resources that are treated, transformed or converted† (for example, materials, information and customers) and â€Å"transforming† resources as being â€Å"the resources that act upon the transformed resources† (for example facilities and staff) (Slack et al, 2001, pp.10-11). Slack et al note that in most cases, one of the transformed resources takes precedence over the other two. So for instance they note that while a bank devotes some of its time to processing materials and customers, its main focus is on processing information (Slack et al, 2001, p.11). However, it should be noted that in a modern, inter-dependant economy, it is unlikely that any organisation is able to operate without touching on each of the transformed resources and as such, the issue becomes one of the extent to which the other transformed resources are touched upon rather than whether or not an organisation’s operations touch on them at all. With respect to transforming resources, Slack et al refer to two types which form the â€Å"building blocks of all operations†. These are â€Å"facilities†, â€Å"the buildings, equipment, plant and process technology of the operation† and â€Å"staff†, â€Å"those who operate, maintain, plan and manage the operation† (Slack et al, 2001, p.11). Slack et al note that the transformation process is closely connected to the nature of the input resources which are being transformed. The three predominant types of operation processors are material processors, information processors and customer processors. Material processors predominantly transform the physical properties of the input resources, but may also change their location, their possession or store the materials. Information processors transform the informational properties of the input resources, the possession of the information, store the information or change the location of the information. Customer processing operations may change the physical properties of the input resource, store the resource, change the location, change their physiological state or their psychological state (Slack et al, 2001, pp.12-13). However, it is important to note that each macro organisational process also consists of numerous micro organisational processes (eg marketing and sales, set and props manufacture, engineering, production units and finance and costing) each of which contribute to what Slack et al (2001, p.19) refer to as the â€Å"end to end business process†. The flow of information, materials and/or customers throughout this end to end business process is often extremely complex. In terms of operations management, understanding that the transformational process model applies both at the macro level and at a micro level allows an organisation’s management to ensure that managers at all levels within the organisation understand that to a certain extent they are all involved in ensuring that their operation involves a transformational process and that it is only where the transformational processes of all these micro operations operate smoothly that the macro transformational process can be successful. It should also be noted that in many cases, organisations seek assistance from external organisations with respect to those micro processes. Thus for instance, an advertising agency provides a service which a large car manufacturing company may process internally. Or for instance Nike, which is thought of as a shoe manufacturer, is in fact a marketing processor specialising in shoes (the manufacturing of the shoes is, while done to Nike’s specifications, performed by external contractors with Nike concentrating on developing and maintaining their brand image). Slack et al (2001, pp. 18-19) refer to three core functions as transformation process operations. These are â€Å"product/services development function†, â€Å"operations function† and â€Å"marketing function†. The product/services development function involves â€Å"designers design software -> producing effective new products and services -> appropriate designs as promised and to budget†. The operations function involves â€Å"transformed/transforming resources -> producing service value for customers -> products and services†. The marketing function involves â€Å"sales people marketers market information -> producing sales and market plans -> orders marketing plans as promised and to budget†. As noted above, different types of operations (ie manufacturing and services) will involve different types of inputs, a different transformational process and result in different types of outputs. In order to compare how these differences are covered by Slack et als transformational process model, it is perhaps best to compare and contrast two specific examples. In this case, it is intended to compare and contrast differences between the transformational process of a car manufacturing operation (manufacturing) and an advertising agency (service). In terms of the basic input-transformation-output process, a car manufacturing and advertising agency’s operations can be described as follows: Operation Input resources Transformation process Outputs Car manufacturing Steel/plastic/other materials Car manufacturing equipment Machine operating staff Car manufacturing plant Design and procurement Fabrication Assembly Testing Distribution Cars Advertising agency Creative staff Admin staff Computer systems Information Customers Offices Client solicitation and pitching Creative production Delivery Account management Advertisements Increased sales One of the fundamental differences between the transformational process of a car manufacturing operation and an advertising agency is balance between facilities and staff resources. The car manufacturing operation will have much of its investment in physical facilities with the focus of operations managers in such an organisation being on ensuring that those facilities are operating smoothly. The transformational process for a car manufacturing plant is a technical/mechanical process which should run exactly the same every time. While there is creativity involved in the initial design stage of the vehicles and parts, the fabrication stage should involve no creativity and will essentially follow a set process which is repeated hundreds, if not thousands, of times each week with the purpose being to lower costs by automating the same repeated tasks. While staff in a car manufacturing operation remain important, their importance is secondary to the operation of the facilities themselves (ie should there be a problem with the operation of the facilities, the staff are not in a position to continue assembling the cars on their own – ie their effectiveness is directly linked to the effectiveness of the facilities themselves). Conversely, the importance of facilities to an advertising agency is entirely secondary to the importance of the staff that it employs. Preparing an advertising campaign is a largely creative process which varies from client to client and which does not therefore lend itself to automation. Due to the creative nature of an advertising agency’s work, should the facilities of an advertising agency for some reason become temporarily unavailable, it should be able to continue its operations using the same staff. Naturally, the importance of the less important transforming resource should not be underestimated and it is not the case that either of these two operations can continue without both transforming resources. Rather, it is that one of these transforming resources is more fundamentally important than the other. For instance, while an advertising agency’s staff should be able to continue with their transformational work even where the facilities they have been using are temporarily unavailable, it is highly likely that their transformational work will be less effective especially where the unavailability of facilities involves not only office space, but more importantly, informational resources such as computer systems, market research information, etc. Likewise, while a car manufacturing operation can replace staff that for instance, go on strike, the efficiency and effectiveness of newly employed staff will be lower than those who have experience working with the machinery and the organisation’s operational process. The point is that the balance for a car manufacturing and an advertising agency are different between facilities and staff and so too are therefore each organisation’s operations management concerns (Slack et al, 2001, p.12). With respect to the transformational process, a car manufacturing operation is predominantly a materials processor while an advertising agency is predominantly an information processor. A car manufacturing operation transforms the physical properties of the input resources involving the input of steel, plastic, and other materials the nature or which are then physically transformed into cars. An advertising agency on the other hand deals with information as its input resource (for instance, market research, demographic data, previous advertising campaign effectiveness, customer aims, etc) and transforms these into advertising campaigns the goal of which is to increase its customers’ sales. The operational outputs also differ substantially as between a car manufacturing operation and an advertising agency. Perhaps the most profound difference is that the outputs of a car manufacturing operation are an actual tangible product while for the advertising agency it is an intangible service. The difference between these two types of outputs affects such considerations such as storability, transportability, simultaneity, customer contact and quality (Slack et al, 2001, pp.13-14). Clearly a car has a degree of tangibility that an advertising campaign does not. This means that a car is able to be stored and transported. Likewise, the car manufacturing process involves production well before the customer ever sees it while with an advertising campaign, the psychological aspects occur simultaneously with its execution. As most customers will purchase a new car from a manufacturer’s own branded car yard, there is some contact between customer and manufacturer (more so than with other types of manufacturers such as for example household appliances where the manufactured good is sold via a third party retailer with no relationship with the manufacturer). The integrated supply chain for car manufacturers also affects the quality in that whereas with other manufactured products, the relationship between manufacturer and customer is more distant, the integrated supply chain for car manufacturers means that the customer is more likely to judge the quality of the operation from the quality of the product (although still not to the same extent that they would for a pure service such as a hair cut). Slack et al (2001, p.15-16) note that all operations fall somewhere within the spectrum between pure goods producers and pure service producers, with most operations producing a mixture of both products and services. They propose that each producer has a predominant type of output and that any peripheral output for that producer is referred to as a â€Å"facilitating† output. That is, for a goods producer, any services produced shall be â€Å"facilitating services† (eg technical advice) while for a services producer which produces peripheral goods (eg report and documents) these represent â€Å"facilitating goods†. This is perhaps a dated view of such operations which Slack et al acknowledge when noting that the distinction between services and products is becoming increasingly difficult to define. Perhaps a more accurate distinction is between the types of processors (ie materials, information and customer) rather than simply between goods and services. In reality, many service operations (especially information processors) do produce a tangible output which can be stored (for instance a travel agency will produce a booking which is reflected in a physical itinerary, a law firm will produce legal documents, a bank will produce bank statements, etc). It is generally customer processors (such as theme parks, theatres, public transport, airlines and hotels) which do not produce a tangible output which can be stored. In many ways, with the advent of the information revolution, the outputs of information operations have come to more closely resemble to outputs of traditional manufacturing operations more than traditional service operations. In general, a distinction needs to be made between services which produce a tangible output and those services which are consumed at the same time as they are produced. While both these operations fall within the overall heading of â€Å"services†, their natures are entirely different. The main difference between an information processor service and both material processors and customer processors are that an information processor’s output is not unique. That is, an information processor’s output is generally able to be copied at no additional cost. This can be contrasted to a material processor’s output such as a car or a customer processor’s output such as a haircut. Neither a car nor a haircut can be reproduced without additional inputs being used and the transformational process starting again at substantial cost. An informational output on the other hand, such as a legal document or a song can be reproduced an unlimited number of times at minim al cost and without the need for the original transformational process to be repeated (although large scale copying may require an additional transformational process eg producing CDs and DVDs). With respect to a car manufacturing operation and an advertising agency, both produce an output which is (arguably in the case of the advertising agency) tangible (ie cars and an advertising campaign respectively) although one is clearly much more tangible than the other. However, both the manufactured car and the advertising campaign loose relevance as time progresses and as such, the intention for both operations is to transfer the finalised output from the organisation responsible for processing the input onto the customer. The longer this transfer from processing operation to ultimate customer takes, the less relevant within the marketplace their outputs become (this statement will clearly not apply in certain cases for instance prestige cars which may increase in value the longer they are stored). The fundamental differences between a car manufacturing operation and an advertising agency have important implications on an organisation’s operations management. Both the advertising agency and car manufacturing consist of transforming resources facilities and staff. The difference is in the input of transformed resources as the car manufacturing is predominantly a material process and the advertising agency an information processor. The transformation process in operations is closely connected with the nature of its transformed input resources. Outputs from the transformation process are goods and services with the main difference being that an advertising agency provides a service while a car manufacturer produces a good. The difference in tangibility of the outputs also has an affect on storability, transportability, simultaneity, customer contact and quality. BIBLIOGRAPHY Slack, N., Chambers, S. Johnston, R. (2001), Operations Management, 3rd ed., Prentice Hall, Harlow, England

Robot in Medical Field

VEX ROBOTICS ESSAY I believe that robotics should be used in the medic field because they can be safer and be more helpful. They can save time and a person life. They are more accurate. I have a evidence to prove that robots are safety to use. 1. In 1997, surgery was performed in Cleveland using Zeus, a robotic surgical system. The operation successfully reconnected a woman’s fallopian tubes. 2. In May of 1997, the first robotically-assisted operation for a heart bypass case in Germany was successfully done using the da Vinci surgical system. 3.The first coronary artery bypass graft was performed using the ZEUS robotic surgical system in October, 1999, in Canada. 4. The first unmanned robotic surgery was performed in Italy, in May, 2006. 5. Also in 2011 a 50 year old mother of 4 child, Maureen Sampson was suffering from gastrointestinal disorder. This is very serious and it can be deadly. Her conditions worsed each day. As the day went by her condition worsed. But in july of 2 011 her doctor referred her to the robotic-assisted surgery program at Swedish Covenant Hospital in Chicago.Maureen didn’t hesitate after learning that she could recover in a matter of weeks versus months compared to a conventional surgery. Just a month after her surgery, Maureen was back at work, back to daily life with her family, and finally feeling at ease about her health. Maureen is just one of hundreds of patients who have benefited from the knowledge and skill of the robotic-assisted surgical team. But remember these are just some of the examples of succesful robotic surgery. Robotic-assisted procedures reduce the negative impacts of surgery, allowing for a speedier recovery and less pain, risk of infection, and scarring.Surgery robots on this day are actually cleverly made manipulators controlled by competent doctors. Nowadays, there are two fields where surgical robots are being developed and tested. One is telerobotics which enables a doctor to do a surgery at a di stance. The other field is minimally invasive surgery – surgery done without making large cuts. The da Vinci robot surgery system is one great example of robotics use for surgery purposes. The da Vinci System consists of a surgeon’s console that is typically in the same room as the patient and a patient-side cart with four interactive robotic arms controlled from the console.Three of the arms are for tools that hold objects, act as a scalpel, scissors, bovie, or unipolar or bipolar electrocautery instruments. The fourth arm is for an endoscopic camera with two lenses that gives the surgeon full stereoscopic vision from the console. For patients, the benefits of robotic assisted surgery may include: -Decreased post-operative pain -Decreased risk of infection -Decreased use of anesthesia -Decreased blood loss -Shorter hospital stay -Quicker and more complete recovery -Faster return to normal daily activities

Influence Of Gangs Essay - 1059 Words

Gang Culture has increasingly become a subculture for many teenage youths. Mainly minority teens, these social outcast are often have no real economic stability and no parental supervision or guidance. As a result, teenagers often rebel and seek comfort in gangs. These gangs provide what is lacking in their lives, a sense of belonging. Minorities are often stereotyped and criticized, especially minorities born into poverty. They are condemned simply because they are not of the same race or of the same class as the majority (often middle class whites). Before these minorities can even prove themselves equal, society already pushes them towards the subculture that has risen out of oppression and rebellion. Gang culture reinforces, and in†¦show more content†¦Instead they worry more about being accepted into the right crowds and owning lots of expensive items to show off. Most people fail to realize gang members are products of a bad environment that they are forced to live in. Immigrant families arrive with little money and have no choice but to live in bad neighborhoods. Society sees ghettos that are overfilled with immigrants and gangs so all low-class minority teens end up being stereotyped as being gangsters. The violence is not only on the streets but also at home. Often times, lower-class minority teens come from unstable homes. Immigrant parents no doubt already have a difficult time trying to make it in this prejudice society. With hard time the common cycle of poverty, drug and alcohol abuse, and sometime physical abuse arises. As a result teenager often rebel against their parents and find solace elsewhere. Because of the lack of love and guidance from parents, teens often stray from the family and wander blindly into the life of a gangbanger. Many of these ghetto troubled teens feel that they have nothin going for them so choosing this type of lifestyle is their way of getting through life and it is the only way they know to get through llife. Adolescence is the most crucial time to shape a young mind. When the world is against them during these times, many minority teens tend to easily stray from the right path and enter into the wrong crowd. Gangs have become a growingShow MoreRelatedInfluence Of Gangs On Theu.s.1296 Words   |  6 PagesInfluence of Gangs on the U.S Despite the discrete and sly manner of gangs, their presence and acts have affected and continue to affect the U.S in many aspects. Since their early beginnings in the 1780s, shortly after the Revolutionary War, gangs have had control and power in many areas of the U.S. When gangs were still a new idea in the U.S most had real jobs and few were involved in serious crimes (Wolff 6). It wasn’t until the nineteenth century, a time where the U.S economy was in a rut andRead MoreInfluence Of Gangs On Adolescents2333 Words   |  10 Pages Influence of Gangs on Adolescents in America Madison M. Prettyman California State University, Fresno Criminology 120- January 1, 201 Abstract This paper discusses and analyzes three different films, Crips and Bloods, A Better Life, and Gran Torino. The films each explore the social settings of three distinct minority groups; the paper notes and describes several similarities among the groups. These include widespread poverty, discrimination from the dominant social order, and the lack of availabilityRead MorePolitical Influence Of The Gang Of Four Essay1507 Words   |  7 Pagesmovement; great proletarian cultural revolution; The smash of the gang of four and the reform and opening-up policy, etc. All the articles or books I have read explains those movements from a different angle. In the following section, I will explain the specific movement in two ways - the ordinary history book and the approach from the article, which can’t be found in Chinese network. The Political Influence of Feminism - the smash of â€Å"the gang of four† In the Chinese high school history book, we alwaysRead MoreInfluence of Gangs Essay1072 Words   |  5 PagesBy: Susanna Lee E-mail: lees@student.ucr.edu Gang Culture has increasingly become a subculture for many teenage youths. Main minority teens, these social outcast are often have no real economic stability and no parental supervision or guidance. As a result, teenagers often rebel and seek comfort in gangs. These gangs provide what is lacking in their lives, a sense of belonging. Minorities are often stereotyped and criticized, especially minorities born into poverty. They are condemned simplyRead MoreGangs Influence On Black Youth Essay2031 Words   |  9 PagesGangs have existed in America since the early eighteenth century, they first rose a outsider institutions that provided membership and sense of self to individuals who were not seen as part of the community. Traditionally, gang membership correlates to familial membership; parental and family membership in a gang elevates the possibility of youth also joining a gang. Though these outsider institutions have developed overtime, they pose some of the most violent threats to public safety, but alsoRead MoreSocial Influences Of Female Gang Membership1474 Words   |  6 PagesWithin the last decades, gangs have become one of the fastest growing issues in the United States. When most people define gangs, females are not part of the definition. Most government officials and researchers do not see females a contributor to the fasting growth of gangs in the United States when in fact, the number of females associated with gangs is constantly increasing. Female gang membership in the United States is estimated to be between 10 and 35 percent of the gang population, with someRead MoreThe Influence Of Gang Affiliation On The Family Structure2687 Words   |  11 PagesThis boundary was also a factor that lead Raoul to joining a gang in his youth. He affectionately referred to them as the â€Å"homeboys† and didn’t go into too much detail about their activities (and I was afraid to pry) but his membership in this gang was one of the things that got him into trouble and negatively influenced his educational attainments. Raoul grew up in Sanger, surrounded by other Mexican immigrants who were in the same low-economic cycle and poor neighborhoods as he was and his parentsRead MoreGang Membership : Social And Psychological Factors That Influence Becoming A Gang Member Essay1766 Words   |  8 PagesGang membership accounts for the rising number of youth and street gangs since the 1950’s, since the development of gangs globally, especially in New Zealand there are significant factors that influences becoming a gang member. There is a range of social and psychological factors that underpin and gain insight into the dynamic gang structure of gangs and how this influences others to become involved in gangs. Research has noted there are push and pull factors that are associated with the theory ofRead MoreThe Influence of Geography and Social Networks on Gang Violence1520 Words   |  7 PagesGang violence is becoming a kn own threat in our country. Gang violence is defined as a group of people by repetitive socializing individuals or close friends with recognizable influence and inner coordination. These gangs will claim full control over a region in a community, town, or specific area which will lead to the involvement of violent crimes and unlawful behavior as a group or even by oneself. Since these gangs are increasing in size in communities, citizens of certain areas are beginningRead MoreContributing Factors to Juvenile Delinquency1620 Words   |  7 Pages social learning, control, and labeling, to explain the different prospective of why it is thought that juveniles commence in delinquent behavior. This particular discussion however, is going to be about the influence of gangs on juvenile delinquency. A general definition of a juvenile gang would be any durable youth group whose involvement in illegal activity is part of the group identity, they will have a unique name, they openly use coe rcion, aggression, power, force, extortion, and intimidation

Who Really Has All the Power The Executive, Legislative,...

Who really has all the power At the beginning of the creation of the constitution, our founding fathers objectives were to establish a federal government, and to outline an equal distribution of powers within our government.(Michelsen, 2010). It was implemented by creating three branches that had to coincide with each other to function. Each branch has its own powers, duties, and responsibilities that influence how the government works. Executive Branch, which pertains to executing the laws. The legislative, which creates the laws and the judicial which interprets the laws. The constitution states their powers and their checks on one another, and its obvious that the legislative has the most power over all the other branches.†¦show more content†¦Ã¢â‚¬Å"Congress has a portion of the war power because the members of Congress come from the several states and have close ties to all the people. The idea was that by splitting up the war power, the country would not go to war unless both constituencies – meaning the whole country – supported war.†(Understanding t he Constitution of the United States). Only way for a war to happen is if congress deems it reasonable, subordinating the executive branch. The legislative branch is also the â€Å"only part of the government that can make new laws or change existing laws.†(white house). A society is formed and controlled by rules and regulations, those who make these rules and regulations basically control society. The president does have the power to veto any law he doesn’t approve of, but if Congress is in accord with the Senate they can â€Å"override his veto with two thirds vote of each chamber.†(white house) ounce again subordinating the president . When the legislative branch has both houses in coalition with each other the executive branch really has no power over the legislative branch. Congress not only creates the laws, but they even overview how are they executed. The executive branch’s job is to implement the laws created by congress. Congress makes sure the laws they have made are being administered correctly. In that sense the executive branch is always under the consent of the legislativeShow MoreRelatedThe Constitutional Convention Of Philadelphia Essay1535 Words   |  7 Pagesbrought nearly all of the nation’s most prominent men together, including Alexander Hamilton, Benjamin Franklin, James Madison and George Washington. Several of the men appointed had records of service in the army and in the courts and others were experienced in colonial and state government. When Thomas Jefferson found out who had been appointed he wrote â€Å"It is really an assembly of demigods† to John Adams. That summer in Philadelphia, the men, drew out a document defining the distinct powers for the theRead MoreLegislative Branch Rules Everything Around Essay1729 Words   |  7 PagesThe Branches of Government It all goes back to the framers of the Constitution, who are the Founding Fathers. They wanted to form a government that did not allow one person or group to have too much control and authority. The Articles of Confederation was created and taught them that there was no need to have a centralized government. The Framers wrote the Constitution to provide Separation of Powers. It each has its own responsibilities of its own yet at the same time, they work together to makeRead MoreHow Democracy Is Influenced On Democracy1310 Words   |  6 Pagesdemocracy is. The formal definition of democracy is a form of government by the people, but what we need to further evaluate what this really means. According to David Plotke in his article Representation is democracy, democracy is when the people have representatives who aim to fulfill their needs and achieve different targets that the people want. Ultimately, the people are the main source of power is vested in the people. This power is exerc ised through authority figures the people elect to representRead MoreThailand Essay1154 Words   |  5 Pageswith one another.Government systems play a really important part in a country because it is how the people of the country lives upon it, and it keeps stability in society, without it there’d be so much chaos and the people of the country wouldn’t know how to settle down. First off, Thailand has a Constitutional Monarchy with a population of more than 67 million.Their governmental structures are the Executive branch, Legislative branch, and Judicial branch. The king is the head of state. Maha VajiralongkornRead MoreConstitution Worksheet Essay1712 Words   |  7 Pagesshaping American government. * Self-Government: Is the most important principle in the Constitution of the United States and refers to the need to have a system which would make sure that everyone has a voice in the local, state and national governments.(www.4uth.gov.ua) Separation of Powers: Each branch is responsible for their job. Separation of power establishes that one person or group of people could not control the government alone. TheRead MoreThe Judicial Branch Of The United States1515 Words   |  7 Pages The United States of America has a very complex system of government through the use of checks and balances. The system we have in place allows for the three branches of government to control one another so that one branch could not be the most powerful. What makes the judicial branch different is that the decision brought by the Supreme Court is the final say and cannot be overruled. Along with that the election process for the legislative and executive branch is brought to by the use of a voteRead MoreThree Branches of the Texas Government Essays1628 Words   |  7 Pagesthree branches of our State Government, the Legislative Branch, Executive Branch and finally the Judicial Branch. Our State Government resembl es our National Government in various ways but also in very different ways which we will review in this essay. I will identify a handful of criticisms and problems associated with the provisions in each of these branches of our State Government and identify suggested reforms that many feel are needed. Our Legislative Branch has two chambers or as some willRead MoreThe Branches Of Government And The Legal System1652 Words   |  7 Pages The Branches of Government HRM 322 Raniesha Battle University of Mount Olive Abstract In this research paper, my goal is to explain how legislative, regulatory, and judicial systems work to define the equal employment opportunity. This will be better for managers in human resources who can better manage their workers by following and using the legal system. If human resource managers enforce the legal system in the workplace effectively they will have a competitive advantage. An enforcementRead MoreFederal Government And The United States1498 Words   |  6 Pages Federal Government The United States of America government is called the federal government and is the republic of the fifty states which constitute the United States. It also constitutes the capital districts and several other territories. Now the government is made up of three different branches and they are the Executive, Legislature, and the Judicial. Those powers are all vested by the US constitution which is in the congress, the president, and also the federal court that also includesRead MoreThe Primary Responsibility Of The Legislative Branch1310 Words   |  6 PagesRepresentative form the Legislative Branch of government, also known as Congress. The primary responsibility of the legislative branch is to write and pass laws. Laws are first written as a bill and then discussed by the Senate and the House of Representatives. The bill can have items added, removed or modified each time it is presented by either the Senate or the House of Representative. Once the bill is voted and approved by Congress, it is passed to the executive branch for approval. If it is